Antique sound Lab Ltd

Integrated amplifiers

 

 MG-SI15 - Newly upgraded with higher grade transformers, larger extruded aluminium chassis and better quality connectors. KT 88 output tubes with 15 Watts  RMS  per channel. Single ended class `A¨ topology with triode and pentode operation. External bias adjustment with calibrated bias meter for convenience. Wide range biasing for other octal based output tubes. Line level subwoofer out puts included. Superbly clean and musical sound at an unbelievably low price.

New! includes Aluminum  remote control transmitter. - more detail ...
 

 AQ1001 MK II - Newly updated with higher quality parts and New aluminum chassis. choke filtered power supply for a faster and more dynamic sound. 50 Watts per channel, switches to 29 Watts per channel in pure triode mode. Wide range bias adjustment for other octal based output tubes. Built in calibrated bias meter. Line level subwoofer outputs. Seriously refined real audiophile sound.
New! includes Aluminum  remote control transmitter. - more detail ...

 

 AQ1003 - 30 Watt RMS  per channel. New special shape aluminum  conner chassis and improved parts. Calibrated built in bias meter for convenient tube maintenance. Volume remote control and line level out puts for subwoofers.  -more detail ...

 Leyla 845 -  vertical chassis with upgraded transformers. 22 W RMS /Channel,   single ended triode  , Tube regulated choke filtered power supply, (0) NFB. Easy bias adjustment by a calibrated built in meter.  - more detail ...

Pre amplifiers

Line 1 - Compact tube preamplifier with four line level inputs and two sets of out puts.

                 more detail ...
 

Flora-EX - New! Warm ! high-resolution purist design.
Resistor free signal path.
Autoformers/switch controlled voltage divider volume setting.
Triode tube gain stage with constant current source , Very precise transformer coupled output stage , All film cap filter & Multi PI Power filter with very clean B+
. -
more detail ...

Lorelei - New!  Very high-resolution purist design , No output transformers , No cathode follower but very low output impedance , can drive all solid state & tube amplifiers , It have output jack for 32 Ohm ~ 600 Ohm Headphone. It is a very good Line/Headphone amplifiers.  It use our New pattern  amplifier circuit.  Feed back or no feedback can be choice by a switch.  - more detail ...

Passive T1 - auto former/switch voltage divider control unit. Non resistive volume level controls. 4  inputs and one tape monitor loop. Will drive long cables well.
          
more detail ...

       

Passive T2  - More refined version of the T-1 with higher grade auto formers. Finer volume adjustment (2dB steps). Extremely accurate level controls. Excellent impedence characteristics , with Step Motor volumn control.  - more detail ...

 

 

Stereo Power amplifiers

 Tulip - 3.2 WPC SET, step up transformer first stage. Now includes external bias adjustments and bias meter. can work with 45 tubes. Mono bridged to 12 Watts.                        - more detail ...

 Typhoon - High definition stereo tube power amplifier with choke filtered power supply.
(0) global negative feed back. 50W RMS . Choke filtered power supply. Wide range biasing. Tube cage.
  - more detail ...
 

Mono Block Power amplifiers

 

Wave-AV25 - 25 Watts mono push pull power amplifier with 6L6 output tubes. External bias adjustment. - more detail ...
 Explorer-805 MKII -  SET/Para feed design with 50 Watts of power. New extruded aluminum chassis and all improved parts. Powerful single ended amplifier design with excellent frequency extension. Bias adjustment with calibrated built in meter. - more detail ...

 AQ1006-845 MK II - Newly redesigned former -Golden Ear Award- winner with several improvements with a bold new look. Pure SET design with excellent transformers and (0) global NFB for a dynamic and very fluid sound.
Excellent to drive even moderately efficient loudspeakers.
Superbly well-controlled, smooth but very detailed sound.
Tubes are mounted on the upper level and mechanical isolation from the massive transformers below.
Unusually good performance at an affordable price. 
  -
more detail ...

 Cadenza MK II - New vertical heavy metal chassis, very unique triode mono power amplifier with 60 Watts of pure musicality. 2 X 845 push/pull   triodes output with harmonically rich and spatially expansive sound. - more detail ...

 Monsoon MK II - Redesign base on Hurricane MK I circuit but for EL34 tubes

more detail ..

 Hurricane MK II  - Legendary performance is now even better with improved circuit, select transformers and a tight new chassis.
True balanced inputs are now added as a standard feature. Tubes, mounted on a separate level at the top are isolated from hefty transformers for added clarity.
New bias and protection circuits have been developed for stability, reliability and more precise biasing. Dual level vertical chassis construction is stronger, better vibration controlled and occupies less floor space. RCA Input is improved from Hurricane MK I. Balance circuit is by a seperated circuit to keep it 100% balance from Input to output.  No Balance to unbalance convert circuit. It is a real balance balance design.

                   more detail ...

Headphone amplifiers

MG-Head OTL MK III - MkIII version, now even better! All tube SET design with OTL/transformer coupled out puts. Upgraded circuit and outboard power supply.                 - more detail ...
 

Dew - New!  Use our New pattern circuit. OTL design , No cathode follower . Can drive 100 Ohm ~ 600 Ohm with rich bass & very extended high frequency.  -  more detail ....

 

Lorelei - New!  Use  our New pattern circuit. OTL design , 2A3 as output tubes. Zero feed back on high gain ,  -6db gain with 6db feedback.  A very high resolution Line/Headphone amplifiers. Film capacitor & choke multi Pi filter in power circuit. Very simple circuit , with 1 capacitor in signal path /channel only. -  more detail ...

Tatanka - Simplifier from Lorelei , take out the Input selector & output RCA only. - more detail ...